中文版 >>>   English >>>   
Login Form





Forgotten your password?
Products
2.4G Radio System
Technology
Download
Contact
FORUM
Polls
How much time to open our corona-rc web site!
  
Products arrow Single Conversion Receivers arrow RS410Ⅱ
RS410Ⅱ Print E-mail

Among the range of Corona receivers, from crystal receivers to synthesized ones, from single conversion receivers to dual conversion, and from 4ch to 8ch, there will be

Single Conversion Receiver
RS410II Receiver

CORONA never stops improving on the receivers flying range. The RS410II has improved the receiving range as far as 1.5Km (range tested on ground). Corona strive to reduce the size of the receivers, old technology components would need the receiver to be far bigger to match performance.

Longer remote control distance means more reliable control at normal ranges too. The reliability can even compare well with PCM receivers. PCM receivers have good reliability, that is because they use CRC code (cyclic redundancy checking) to replace the wrong data codes which may occur at the edge of signal range. The control will always seem to be fine normally, but when CRC code checking begins to replace bad data frames the PCM receiver wastes a lot of time to receive new data to replace the“bad data”(which happens at times at only half of the range described by manufacturer). So usually while we find that a PCM receiver has no glitches, its control response speed is less than of a PPM receiver in some conditions.

We make receivers more sensitive and with greater selectivity, and with Coronas DSP (Digital Signal Processing) it will make the reliability of a Corona receiver approach the leading PCM receivers. However, its control response speed will not be negatively influenced.
With a new improved circuit design, the RS410II advances IP3 (3rd Order Intercept Point) performance again. It compares closely with all famous brand RC receivers from around the world. IP3 performance of a receiver is vital for several R/C transmitters to be working at the same place at the same time. A receiver with low IP3 performance may still be working fine when 1-2 transmitters with adjacent channels are running in the same time, but once a third adjacent channel transmitter is working nearby the receiver will lose reliable control immediately.

Image

Size
28.5*15*7.4mm
Weight
4.7g(without shrink wrap)
Sensitivity
about 2.0μV
Selectivity
±8kHz at 65dB down
Number of channels
1-4
Filtering
Dual turned RF circuitry
Filtering
Dua 4 pole ceramic filter
Filtering
DSP filtering in MCU with mild algorithm
Shift polarity
Positive or negative (auto-detect)
Case
Shrink wrap
Operating Voltage
4.8V~6.0VDC
Operating Current
11mA
Modulate
FM/PPM(pulse positionmodulation)

The light weight and small size of RS410II predominate other receivers.  Furthermore, we have moved the crystals of RS410II to side face, which improves the reliability of mounting crystals.
We have also improved the DSP.  It can make more strictly filter received signals and eliminate glitch even more effectively.
You can put RS410II receiver in any model, when you install it on whatever electric park flyer, big 3D plane, glider or training plane.  

Reliability, high performance and sale price, they are what CORONA can provide for you.
See the RS 410II User Guide for more details. If you are interested in our R/C technology, please look over the technologies that we use.

 
SEARCH


CORONA Electronic & Technology Co.,Ltd.
No.114,Jiankang.Road,WuXi,JiangSu Province,China WUXI,214031P.R.CHINA
TEL:0086-510-82854181 FAX:0086-510-82854181 Email:sales@corona-rc.com
ICP 06033040